Bullet Series 20 (CAR TRAILER)
| Model: | Bullet-Series 102-20-CT | ||||||
| Type: | Car Trailer | ||||||
| Exterior Length: | 25' - 8" | ||||||
| Tongue: | 2' - 8" | ||||||
| V-Nose: | 2' - 10" | ||||||
| Box: | 20' - 2" | ||||||
| Interior Length: | 22' - 9" | ||||||
| V-Nose: | 2' - 9" | ||||||
| Box: | 20' | ||||||
| Exterior Width: | Upper = 102" / Base = 97" | ||||||
| Interior Width: | Upper = 99" / Base = 94.5" (84" between wheel wells) | ||||||
| Height: | 4' Lowered & 7' Raised | ||||||
| Coupler: | 2 5/16" Heavy Duty (GW 10,000 lbs) | ||||||
| Axles: | 2 Dexter Rubber Torsion E-z Lube 3500 lbs or 5200 lbs | ||||||
| Brakes: | 4-Wheel Heavy Duty Electric w/ Breakaway System | ||||||
| Tires: | 205/75R15 (Heavy Duty Load Range D) | ||||||
| Rims: | 15x6 Aluminum - (Mod Series) | ||||||
| Color | Exterior: | Aluminum (0.040") | |||||
| Interior: | White Heavy Duty Laminated Side Walls or Aluminum Sheet* | ||||||
| Trim | Aluminum (0.040") Polished Diamond Plate or Polished Anodized* | ||||||
| Frame | Heavy Duty 0.186" x 3" x 6" w/ 0.25" x 6" & 2" x 3" x 0.125" Primary Structure) | ||||||
| Floor | 3/4" Marine Plywood / Optional Aluminum | ||||||
Standard Equipment:
Patented Variable Height Enclosure System (4' to 7')
Patented Welded Roof Truss Construction
Patented Dual Linear Guide System
Heavy Duty 6061-T6 & 6063-T52 Aluminum Alloy Frame/Ramp Construction
Matching Painted Sheet or One Piece Mill Finish 0.040" Aluminum Roof
4 Heavy Duty Linear Actuators w/ Custom Covers
88" Wide Patented Folding Aft Ramp System w/ Heavy Duty Center Support
4 Heavy Duty Recessed D-Rings (5000lb MBR) - mounting plates welded
to frame
Stainless Steel/Non Corrosive Exterior Hardware (Hinges, Handles, Fasteners,
Latches)
2 Polished Stainless Steel External Side Vents (double vent style)
Heavy Duty Stainless Steel Ramp Hinges
3M-VHB Tape Aluminum Sheet Attachment
Polished Diamond Plate Lower V-Nose
12" Polished Diamond Plate V-Nose Trim Package (Upper Roof Assembly)
12" Polished Diamond Plate Side Trim Package
Polished Diamond Plate A-Frame Cover
Polished Diamond Plate Corner Trim Package
Custom Trim-Lok and 3M Weather Seals (Roof to Base Enclosure, Doors
and Ramp)
High Visibility LED External Lighting:
Markers (upper & lower 4-corners and Aft Center Tri-Marker)
Brake/Signal (Aft Left, Right)
12 Volt DC Optima Heavy Duty Gell-Cell Battery with under floor
battery compartment
12 Volt DC Interior Lighting Package (1-double & 2-single fixtures with switch)
Electronic Height Control Sensor System
Locking Upper Door Draw Latches (keyed the same)
Heavy Duty Ramp Bumper Package
Locking Actuator Switch Door w/ Weather-Resistant Key Cover
Heavy Duty Upper Rear Door Gas Shocks
Heavy Duty Ramp Spring Assist
110 VAC Weather Proof Shore Power Connector
110 VAC Outlet Package (1 dual wall outlets)
Standard Low-Tow Logo Package (Front, Sides, Back)
Dealer Prep
Common Options:
Aluminum (0.030" White) Side walls & Ceiling
Black & White Checkered Vinyl Flooring and Ramp Package
Custom V-Nose Winch Hardpoint & Winch
Custom Passenger Side Door with Keyed Lock
60" Dual E-Track Wall System w/Ratchet Tie-Down Package (3500 lb MBR)
Heavy Duty Ultra 3000lb Electric Tongue Jack
4 additional Heavy Duty Recessed D-Rings (5000lb MBR) - mounting plates
welded to frame
Additional High Visibility LED Exterior Lighting Package (4 upper
marker lights/per side)
12 Volt DC Interior Lighting Package (10 Recessed Overhead Lights,
sidewall switch)
12 Volt DC Halogen Reverse Light Package (2-lights)
12 Volt DC Halogen Ramp Light Package (2-lights, sidewall switch)
Battery Maintainer/Trickle Charger System
110 VAC Florescent Package (4 covered dual fixtures, sidewall switch)
110 VAC Outlet Package (1 dual wall outlets - aft left)
110 VAC Circuit Breaker/Panel (20 Amp)
2 Adjustable 14" x 14" Roof Vents
Custom Aluminum Ramp Extensions with Storage System (built to
customers specifications)
